VENTS - 1200W duct heater with 200mm remote probe
Estimated Shipping Widget will be displayed here! (with custom color)
Vents Duct Heater Features
The duct heating consumes 1200W is equipped with a adjustable thermostat from -10°c to 40°c and a sin remote temperature. It is designed to heat the fresh air drawn into the ventilation ducts 200mm diameter circles. This is an add-on device that is not intended for off-duct use.
In addition, it is equipped with a remote temperature sensor (probe) and a manual thermostat.
It consists of a galvanized steel frame on which is rigidly fixed the junction box whose cover is removable. On the junction box, there is also the manual thermostat adjustable up to 40°C. An entry located outside the junction box allows the connection cable to be taken out for its grounding. Inside the chassis is the tubular electrical heating element (coil).
This coil heater is rated for a minimum airflow velocity of 1.5m/s. The Ventilation Systems manufacturer designs the use of an inlet air filter to protect the heating element from air impurities.
The manual thermal circuit breaker is equipped with a manual reset button (inside it next to the Reset label). On one of the interior sides is the electrical diagram of this heater. IP40
This heater which has 200mm connection outlets is designed to be installed inside air ducts in a horizontal or vertical position. In the horizontal position, the junction box must imperatively face upwards. The horizontal deviation can be up to 90°.
Info: The duct heating must be disabled if the ventilation is not running.
- Diameter: 200mm
- Power: 1200W
- Weight: 5kg
- Tension: 230 V
- Current: 5.2 A
- Frequency: 50 Hz
- Minimum flow rate: 150m3/h